Paste
SIL-LUB NIA
Nickel base Anti-Seize Compound
DESCRIPTION:
SIL-LUB NIA is a premium quality anti-seize and gasket compound
for use in extreme temperatures and hostile environments. The carrier
of this remarkable compound volatizes upon exposure to high temperature
and deposits a nickel metallic plating on threaded connections,
preventing metal-to-metal contact and guarding against seizure and
galling.
SIL-LUB NIA contains are nickel flake and nearly inert dispersing
solids in a high quality aluminum complex base grease which provides
unsurpassed protection from rust by water penetration or water washoff.
SIL-LUB NIA doesn’t contain copper, lead, graphite, chlorides
or other halogens, phosphorous, or silicones. It may be safely used
with ammonia, acetylene and vinyl monomers, which are unstable in
the presence of copper. SIL-LUB NIA contains no graphite. This is
an additional benefit on stainless steel applications when temperature
exceeds 550?F, as graphite would carbonize and weaken the steel.
The solids packaged in SIL-LUB NIA produces a matrix of particles,
which settle in successive layers or sandwich. This allows the solids
to serve as a lubricant, cushion and seal. This layering does not
allow the welding under compaction that leads to seizure and galling.
APPLICATION:
Used extensively in refineries, chemical plants, petrochemicals
plants, power generation facilities and other harsh environment
on items such as:
Burner Tips Reactor Bolts Heat Exchangers
Manifolds Furnace Hinges Manhole Studs
Pipe Fittings
NOTE: WHEN USING SIL-LUB NIA ON FITTINGS APPLY COMPOUND TO BOTH
MALE AND FEMALE THREADS.
CHARACTERISTICS:
- Contains no lead, copper or graphite
- Prevents seizure up to 1425°C (2600°F)
- Protects against rust and corrosion
- Chemically inert
- Acid resistant
- Strong resistance to water washoff
- Brushable to -18°C
- Will not run, drip, or settle out
| PRODUCT SPECIFICATION: |
|
| Grease carrier Complex |
Aluminium |
| Dropping Point |
260?C (500?F) |
| Water Spray-off |
<8.0% |
| Density |
1.10 |
| Specific Gravity |
1.10 |
| Oil separation, Wt% loss |
Max 3.0 |
| Penetration |
|
| 25°C |
290 – 320 |
| 18°C |
230 |
| NLGI Consistency |
2 |
Coefficient of friction (1” 316 Stainless Steel)
|
0.15 |
Evaporation loss Wt. % 24 hrs.°100°C
|
<1.0 |
| Copper Strip Corrosion |
1A |
| Service rating |
-54°C to +1425°C |
REMARKS:
The above are typical specifications and are subject to the usual
manufacturing tolerances. JAGDISH & SONS is not responsible
for the misuse or the misapplication of our products.
